Huawei quidway s3526 series

Command Manual - Port
Quidway S3500 Series Ethernet Switches Chapter 3 Port Isolation Configuration Commands
Huawei Technologies Proprietary
3-1
Chapter 3 Port Isolation Configuration Commands
 Note:
Quidway S3552F/S3552G/S3552P/3528G/3528P/S3526E/S3526E FM/S3526E
FS/S3526C Ethernet switches support the port isolation configuration.
3.1 Port Isolation Configuration Commands
3.1.1 port-isolate enable
Syntax
port-isolate enable
undo port-isolate enable
View
VLAN view
Parameter
None
Description
Using port-isolate enable command, you can enable port L2 isolation in a VLAN.
Using undo port-isolate enable command, you can disable port L2 isolation.
By default, port L2 isolation is not enabled in a VLAN, that is, L2 forwarding is available
between the ports in a VLAN.
Example
# Enable port L2 isolation in the VLAN.
[Quidway-vlan1] port-isolate enable
3.1.2 port-isolate uplink-port vlan
Syntax
port-isolate uplink-port vlan vlan-id
undo port-isolate uplink-port vlan vlan-id