Huawei quidway s3526 series User Manual

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-16
2.1.20 rip work
Syntax
rip work
undo rip work
View
Interface view
Parameter
None
Description
Using rip work command, you can enable the running of RIP on an interface. Using
undo rip work command, you can disable the running of RIP on an interface.
By default, RIP is run on an interface.
This command is used in cooperation with rip input, rip output and network
commands. Refer to the usage guideline of the related commands.
For the related commands, see network, rip input, rip output.
Example
# Disable the interface Vlan-interface 1 to run the RIP.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] undo rip work
2.1.21 summary
Syntax
summary
undo summary
View
RIP view
Parameter
None

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English