Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-9
Description
Using default-route-advertise command, you can import default route to OSPF route
area. Using undo default-route-advertise command, you can cancel the import of
default route.
By default, OSPF does not import default route.
The import-route command cannot import the default route. To import the default route
to the route area, this command must be used. When local router is not configured with
default route, the keyword always should be used by ase lsa to generate default route.
For the related commands, see import-route.
Example
# If local route has no default route, the ase lsa of default route will be generated,
otherwise it won’t be generated.
[Quidway-ospf] default-route-advertise
# The ase lsa of default route will be generated and advertised to OSPF route area
even the local router has no default route.
[Quidway-ospf] default-route-advertise always
3.1.12 display debugging ospf
Syntax
display debugging ospf
View
Any view
Description
Using the display debugging ospf command, you can view the debugging states of
global OSPF and all processes.
For related commands, see debugging ospf.
Example
# Display the debugging states of global OSPF and all processes.
<Quidway> display debugging ospf
OSPF EVENT debugging switch is on
3.1.13 display ospf abr-asbr
Syntax
display ospf abr-asbr
To Next Page
Loading...
Need help?
General
