Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-12
View
ISP domain view
Parameter
limit: Remaining-online-time threshold in minutes, in the range of 1 to 60. When the
remaining online time of a user is equal to this threshold, the switch begins to send alert
messages to the client.
interval: Sending interval of alert messages in minutes, in the range of 5 to 60.
Description
Use the messenger time enable command to enable messenger alert and configure
the related parameters.
Use the messenger time disable command to disable messenger alert.
Use the undo messenger time command to restore messenger alert to default
settings.
By default, the messenger alert is disabled on the switch.
This function allows the clients to inform the online users about their remaining online
time through message alert dialog box.
The implementation of this function is as follows:
z On the switch, use the messenger time enable command to enable this function
and to configure the remaining-online-time threshold (the limit argument) and the
alert message interval.
z If the threshold is reached, the switch sends messages containing the user’s
remaining online time to the client at the interval you configured.
z The client keeps the user informed of the remaining online time through a
message alert dialog box.
Example
# Configure to start the sending of alert messages when the user’s remaining online
time is 30 minutes and send the messages at an interval of five minutes.
[Quidway-isp-system] messenger time enable 30 5
3.1.12 name
Syntax
name string
undo name
To Next Page
Loading...
Need help?
General
