EasyManuals Logo

Huawei quidway s3526 series User Manual

Huawei quidway s3526 series
894 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #607 background imageLoading...
Page #607 background image
Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-6
Parameter
vlan-id: ID of Guest VLAN, ranging from 1 to 4094.
interface_list: Enable the Guest VLAN interface list. interface_list = { interface_type
interface_num | interface_name } [ to { interface_type interface_num |
interface_name } ] &<1-10>. Note that after the key work to, the port number must be
equal to or greater than the port number before to. &<1-10> means the parameter
before it can be input repeatedly for 10 times.
Description
Using the dot1x guest-vlan command, you can enable the Guest VLAN function on
specified port. Using the undo dot1x guest-vlan command, you can disable this
function.
When you execute this command in system view, if you do not input the interface-list
parameter, it means that to enable Guest VLAN on all ports; if you specify this
parameter, it means that to enable Guest VLAN on the specified port.
When you execute this command in Ethernet port view, you can only enable Guest
VLAN on the current port, and the interface-list parameter cannot be input.
Note the following:
z Guest VLAN is only supported in the port-based authentication mode.
z A switch only can be configured with one Guest VLAN.
z Users who skip the authentication, fail in the authentication or get offline belong to
the Guest VLAN.
z If dot1x dhcp-launch is configured on the switch, the Guest VLAN function
cannot be implemented because the switch does not send active authentication
packet in this mode.
z Among S3500 series ethernet switches, S3552G, S3552P, S3528G, S3528P,
S3526E, S3526E FM, S3526E FS and S3526C support Guest VLAN, and S3526,
S3526 FM and S3526 FS don’t.
Example
# Set the authentication mode to port-based.
[Quidway] dot1x port-method portbased
# Enable Guest VLAN on all ports.
[Quidway] dot1x guest-vlan 1
1.1.6 dot1x max-user
Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei quidway s3526 series and is the answer not in the manual?

Huawei quidway s3526 series Specifications

General IconGeneral
BrandHuawei
Modelquidway s3526 series
CategoryNetwork Router
LanguageEnglish

Related product manuals