Huawei quidway s3526 series User Manual

Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-5
Example
# Configure 802.1x user to use PAP authentication.
[Quidway] dot1x authentication-method pap
1.1.4 dot1x dhcp-launch
Syntax
dot1x dhcp-launch
undo dot1x dhcp-launch
View
System view
Parameter
None
Description
Using dot1x dhcp-launch command, you can set 802.1x to disable the switch to
trigger the user ID authentication over the users who configure static IP addresses in
DHCP environment. Using undo dot1x dhcp-launch command, you can set 802.1x to
enable the switch to trigger the authentication over them.
By default, the switch can trigger the user ID authentication over the users who
configure static IP addresses in DHCP environment.
For the related command, see dot1x.
Example
# Disable the switch to trigger the authentication over the users who configure static IP
addresses in DHCP environment.
[Quidway] dot1x dhcp-launch
1.1.5 dot1x guest-vlan
Syntax
dot1x guest-vlan vlan-id [ interface interface-list ]
undo dot1x guest-vlan vlan-id [ interface interface-list ]
View
System view/Ethernet port view

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English