Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 2 Portal Configuration Commands
Huawei Technologies Proprietary
2-3
Free User:
No Free User
Portal Server:
1)pt2:
IP = 192.168.0.200
Key = huawei
Port = 2000
URL = "http://192.168.0.200"
ARP-HandShake:
Interval: 60s Retry Times: 5
VLAN Portal Configuration:
VLAN 3 : Portal Started Portal Server: pt2
Index State MAC IP VLAN Port
Table 2-1 Description on the fields of the display portal command
Field Description
Run Method
The operating modes for the Portal server fall into three
categories: direct authentication (the output displays Direct),
re-DHCP authentication (the output displays ReDHCP) and
Layer 3 Portal authentication (the output displays Layer3).
Free IP
Free IP addresses. The Portal server uses a free IP
automatically.
Free User Authentication-free users
Portal Server
The basic information of the Portal server, including the IP
address, communication key, port and URL for HTTP
redirection
ARP-HandShake
ARP handshake information, including time interval and retry
times
VLAN Portal
Configuration
The following information about enabling Portal: whether to
enable Portal, the name of the Portal server to be enabled and
the information about the connected user (such as the user
state, MAC address, IP address, connected port number and
others).
Note:
URL = uniform resource locator
HTTP = hypertext transfer protocol
ARP = address resolution protocol
MAC = media access control
# Display Portal ACM statistics.
<Quidway> display portal acm statistics
ACM Statistics Running State Statistics
WAIT_MAC_ACK 0
To Next Page
Loading...
