Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 10 IP Performance Configuration Commands
Huawei Technologies Proprietary
10-5
Parameter
None
Description
Using display ip statistics command, you can view the statistics information about IP
packets.
For the related command, see display ip interface, reset ip statistics.
Example
# View statistics about IP packets.
<Quidway> display ip statistics
Input: sum 7120 local 112
bad protocol 0 bad format 0
bad checksum 0 bad options 0
Output: forwarding 0 local 27
dropped 0 no route 2
compress fails 0
Fragment:input 0 output 0
dropped 0
fragmented 0 couldn't fragment 0
Reassembling:sum 0 timeouts 0
Table 10-4 Description of the output information of the display ip statistics command
Field Description
sum Sum of input packets
local
Number of received packets whose destination is
the local device
bad protocol Number of packets with wrong protocol number
bad format Number of packets in bad format
bad checksum Number of packets with wrong checksum
Input:
bad options Number of packets that has wrong options
forwarding Number of forwarded packets
local Number of packets that are sent by the local device
dropped Number of dropped packets during transmission
no route Number of packets that cannot be routed
Output:
compress fails Number of packets that cannot be compressed
To Next Page
Loading...
Need help?
General
