Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-3
Parameter
group-address: Multicast group address, used to specify a multicast group, ranging
from 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast forwarding table.
interface-type interface-number: Specifies the interface.
register: Register interface of PIM-SM.
Description
Using display multicast forwarding-table command, you can view the information of
IP multicast forwarding table.
For the related command, see display multicast routing-table.
Example
# View the multicast forwarding table information.
[Quidway] display multicast forwarding-table
Multicast Forwarding Cache Table
Total 2 entries
00001. (4.4.4.4, 224.2.254.84), iif Vlan-interface1, 0 oifs
Matched 240 pkts(11288 bytes), Wrong If 0 pkts
Forwarded 232 pkts(11288 bytes)
00002. (4.4.4.4, 224.2.149.17), iif Vlan-interface1, 1 oifs
List of outgoing interface:
01: Vlan-interface2
Matched 236 pkts(3267 bytes), Wrong If 0 pkts
Forwarded 233 pkts(3267 bytes)
Matched 2 entries
Table 3-1 Description of information generated by the command display multicast
forwarding-table
Field Description
Multicast Forwarding Cache Table Multicast forwarding cache table
Total 2 entries Total number of entries
00002 Sequence number of entries
(4.4.4.4, 224.2.149.17) (s,g)
To Next Page
Loading...
Need help?
General
