Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 3 Logon user’s ACL control commands
Huawei Technologies Proprietary
3-5
privpassword: Specify the encryption password with a character string, ranging from 1
to 64 bytes.
acl acl-number: the number of basic ACL, ranging from 2000 to 2999.
local: Local entity user.
engineid: Specify the related engine ID of the user.
Description
Using snmp-agent usm-user command, you can add a new user to a SNMP group,
and perform the ACL control to the user through the parameter acl acl-number. Using
undo snmp-agent usm-user command, you can cancel a user from corresponding
SNMP group, meanwhile delete the configuration of ACL control.
Example
# Adds a user huawei for huaweigroup (an SNMP group), configures to authenticate
with HMAC-MD5-96 and sets authentication password as hello, meanwhile perform the
ACL control to the user through ACL 2020 . (Suppose ACL 2020 has been defined.)
[Quidway] snmp-agent usm-user v3 huawei huaweigroup authentication-mode md5
quidway acl 2020
To Next Page
Loading...
