Philips Azurion - Page 338

Figure 173 Laser pr
oduct label
Label text: CLASS 1 LASER PRODUCT
The following statement on compliance applies to the XperGuide laser tool:
Complies with FDA performance standards for laser products except for the deviaons pursuant to
laser noce 50, dated June 24, 2007.
Spring Arm Monitor Ceiling Suspension (MCS)
For more informaon about the following labels, refer to the Instrucons for Use supplied with the
spring arm MCS.
Figure 174 Spring arm w
arning label
Label Text
Please don't hang anything on the handle. It may detune the spring arm.
The following label on the spring arm warns the user that the spring arm may jump up suddenly.
Figure 175 Locking pin w
arning label
Label Text
Personal injury: Do not remove locking pin without adapon ins
talled.
Equipment Rack
The following label indicates the maximum payload for the equipment rack. The actual weight indicated
on the label depends on the opons installed in the equipment rack. For more informaon, refer to the
Instrucons for Use supplied with the equipment rack.
Technical In
formaon Equipment Labels
Azurion Release 1.2 Ins
trucons for Use 338 Philips Healthcare 4522 203 52421