Toshiba e-STUDIO4500c - Page 516

SERVICE PROGRAM TABLES April, 2007
5-24
1105
Htg Roll Sn1:Ctr Heating Roller: Sensor 1 (Center)
Heating Roller Heating Roller
SP codes 001 to 027 control the temperature of the
heating roller.
001
Prefeed Temp Free-rotation start time.
[60~200/1 deg.]
002
Reload Temp At normal standby temperature.
[130~200/1 deg.]
003
Wait Temp:Norm At normal standby temperature.
[50~200/1 deg.]
004
Wait Temp:Low At low standby temperature.
[50~200/1 deg.]
005
Wait Temp:High At high standby temperature.
[50~200/1 deg.]
006
1-S Norm:1Col During copying.
[130~20/1 deg.]
007
1-S:Norm :FC During copying.
[130~200/1 deg.]
008
1-S:Trace:1C During copying.
[130~200/1 deg.]
009
1-S:Trace:FC During copying.
[130~200/1 deg.]
010
1-S:Thk1:1C:HS During copying in half-speed mode.
[130~200/1 deg.]
011
1-S:Thk1:FC:HS During copying in half-speed mode.
[130~200/1 deg.]
012
1-S:Thk3:1C:NS:CPM During copying in normal speed mode on thick paper in
black-and-white.
[130~200/1 deg.]
013
1-S:Thk3:FC:NS:CPM During copying in normal speed mode on thick paper in
full color.
[130~200/1 deg.]
014
2-S:Norm:1C During normal speed copying.
[130~200/1 deg.]
015
2-S:Norm:FC During normal speed copying.
[130~200/1 deg.]
016
2-S:Trace:1C During normal speed copying (paper setting).
[130~200/1 deg.]
017
2-S:Trace:FC During normal speed coyping (paper setting).
[130~200/1 deg.]
018
2-S:Thk1:1C:HS During half-speed copying (paper setting).
[130~200/1 deg.]
019
2-S:Thk1:FC:HS During half-speed copying (paper setting)
[130~200/1 deg.]
020
2-S:Thk3:1C:NS:CPM During half-speed copying (paper setting)
[130~200/1 deg.]
021
2-S:Thk3:FC:NS:CPM During half-speed copying (paper setting)
[130~200/1 deg.]