Toshiba e-STUDIO4500c - Page 517

April, 2007 SERVICE PROGRAM TABLES
5-25
022
Thk2:1C:HS During half-speed copying (paper setting).
[130~200/1 deg.]
023
Thk2:FC:HS During half-speed copying (paper setting).
[130~200/1 deg.]
024
Cont OHP:1C During half-speed copying (paper setting).
[130~200/1 deg.]
025
Cont OHO:FC During half-speed copying (paper setting).
[130~200/1 deg.]
026
OHP:1C:100mm/s During 100 mm/s copying (paper setting).
[130~200/1 deg.]
027
OHP:FC:100mm/s During 100 mm/s copying (paper setting).
[130~200/1 deg.]
PressRoll Pressure Roller
028
Reload Temp Until warmup (reload) ends.
[70~180/1 deg.]
029
Wait Temp:Norm At normal standby temperature.
[50~180/1 deg.]
030
Wait:Temp:Low At low standby temperature.
[50~180/1 deg.]
031
Wait:Temp:High At hight standby temperature.
[50~180/1 deg.]
032
1-S Norm Target temperature.
[70~180/1 deg.]
033
2-S Norm Target temperature.
[70~180/1 deg.]
034
Cont OHP During continuous OHP copying.
[130~200/1 deg.]
035
SemiT OHP:100mm/s Target temperature (paper setting).
[70~180/1 deg.]
HotRoll Hot Roller
036
Wait Temp: Norm Normal standby temperature.
[50~170/1 deg.]
037
Wait Temp: Low Low standby temperature.
[50~170/1 deg.]
038
Wait Temp: High High standby temperature.
[50~170/1 deg.]