SCANNER UNIT August, 2006
6-32
The table shows the sensor output for each paper size.
If an original is on the exposure glass, you can check the sensor output with
SP4301 (APS Confirm).
A4/A3 LT/DLT L3 L2 L1 W1 W2
SP4301
Display
A3 11" x 17" 1 1 1 1 1 000 11111
B4 — 1 1 1 1 0 000 11110
A4 SEF 81/2" x 11" 0 1 1 0 0 000 01100
— 8½ x 14" 1 1 1 0 0 000 11100
A4 LEF 11" x 81/2" 0 0 0 1 1 000 00011
B5 SEF — 0 0 1 0 0 000 00100
B5 LEF — 0 0 0 1 0 000 00010
A5 SEF 51/2" x 81/2" 0 0 0 0 0 000 00000
A5 LEF 81/2" x 51/2" 0 0 0 0 0 000 00000
1: On (Paper Detected), 0: Off (Paper Not Detected)
NOTE: If the original is small (such as A5-LEF), all sensors are off and the
machine shows that the original size cannot be detected. However, you
can force the machine to detect A5/HLT in this situation if you adjust
SP4303 (there are settings for A5/HLT SEF and A5/HLT LEF).
W1
W2
L1 L2 L3
To Next Page
Loading...
