Copper Mountain Technologies S2 Series - Calc:func:ttr

S2VNA and S4VNA SCPI Programming Manual
102
CALC:FUNC:TTR
CALCulate <Ch> [:SELected]:FUNCtion:TTRansition <char>
CALCulate <Ch> [:SELected]:FUNCtion:TTRansition?
Description
Selects the transition type when performing the search for the
trace and the target level crosspoints with the CALC:FUNC:EXEC
command.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the transition:
POSitive : Positive peaks
NEGative : Negative peaks
BOTH : Both positive peaks and negative peaks
Query Response
{POS|NEG|BOTH}
Preset Value
POS
Related Commands
CALC:FUNC:EXEC
Equivalent Softkeys
None