Copper Mountain Technologies S2 Series - Sens:corr:coef:meth:solt2; Sens:corr:coef:meth:solt3

S2VNA and S4VNA SCPI Programming Manual
212
SENS:CORR:COEF:METH:SOLT2
SENSe <Ch> :CORRection:COEFficient:METHod:SOLT2 <port1> , <port2>
Description
Selects the ports and sets the full 2–port calibration type, when the
written calibration coefficients are made effective by the
SENS:CORR:COEF:SAVE command.
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port1> the first port number from 1 to 2 (or 4)
<port2> the second port number from 1 to 2 (or 4)
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
SENS:CORR:COEF:SAVE
Equivalent Softkeys
None
SENS:CORR:COEF:METH:SOLT3
SENSe <Ch> :CORRection:COEFficient:METHod:SOLT3 <port1> , <port2> , <port3>
Description
Selects the ports and sets the full 3–port calibration type, when the
written calibration coefficients are made effective by the
SENS:CORR:COEF:SAVE command.
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port1> the first port number from 1 to 4
<port2> the second port number from 1 to 4
<port3> the third port number from 1 to 4
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
SENS:CORR:COEF:SAVE
Equivalent Softkeys
None