Copper Mountain Technologies S2 Series - Calc:mark:func:dom

S2VNA and S4VNA SCPI Programming Manual
121
CALC:MARK:FUNC:DOM
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain[:STATe] {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain[:STATe]?
Description
Specify whether an arbitrary range or the entire sweep range is used
when the marker search is performed.
(command/query)
Target
All traces of channel <Ch> (if the marker search range coupling is set to
ON by the CALC:MARK:FUNC:DOM:COUP command), the active trace of
channel <Ch> (if otherwise),
<Ch>={[1]|2|...16}
Parameter
{ON|1} : Arbitrary range
{OFF|0} : Entire sweep range
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Markers > Marker Search > Search Range