Copper Mountain Technologies S2 Series - Rst; Sre

S2VNA and S4VNA SCPI Programming Manual
37
*RST
*RST
Description
Restores the default settings of the Analyzer.
There is difference from presetting the Analyzer with SYST:PRES
command – in this case all channels are set to Hold.
(no query)
Target
Analyzer
Related Commands
SYSTem:PRESet
Equivalent Softkeys
None
*SRE
*SRE <numeric>
*SRE?
Description
Sets or reads out the value of the Service Request Enable Register
(command/query)
Target
Status Reporting System
Parameter
<numeric> 0 to 255
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
None