Copper Mountain Technologies S2 Series - Sens:corr:ext:port:freq

S2VNA and S4VNA SCPI Programming Manual
289
SENS:CORR:EXT:PORT:FREQ
SENSe <Ch> :CORRection:EXTension:PORT <Pt> :FREQuency{[1]|2} <frequency>
SENSe <Ch> :CORRection:EXTension:PORT <Pt> :FREQuency{[1]|2}?
Description
Sets or reads out the values of the frequency 1 and frequency 2 to
calculate the loss for the port extension function.
(command/query)
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2} for S2VNA or {[1]|2|3|4} for S4VNA
Parameter
<frequency> the frequency value within the frequency limits of the
analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1E9
Equivalent Softkeys
Calibration > Port Extensions > Loss > { Freq1 | Freq2 }