Copper Mountain Technologies S2 Series - Sens:freq

S2VNA and S4VNA SCPI Programming Manual
312
SENS:FREQ
SENSe <Ch> :FREQuency[:CW] <frequency>
SENSe <Ch> :FREQuency[:FIXed] <frequency>
SENSe <Ch> :FREQuency[:CW]?
SENSe <Ch> :FREQuency[:FIXed]?
Description
Sets or reads out the fixed frequency value when the power sweep
type selected.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the frequency value within the frequency limits of the
analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The minimum frequency limit of the analyzer.
Equivalent Softkeys
Stimulus > Power > CW Freq