Copper Mountain Technologies S2 Series - Sour:pow:slop:stat

S2VNA and S4VNA SCPI Programming Manual
362
SOUR:POW:SLOP:STAT
SOURce <Ch> :POWer[:LEVel]:SLOPe:STATe {OFF|ON|0|1}
SOURce <Ch> :POWer[:LEVel]:SLOPe:STATe?
Description
Turns ON/OFF the power slope. The power slope is valid for the
frequency sweep type: Linear, Logarithimic, Segment.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Stimulus > Power > Slope [ON| OFF]