Copper Mountain Technologies S2 Series - Sour:aux:freq:offs

S2VNA and S4VNA SCPI Programming Manual
348
SOUR:AUX:FREQ:OFFS
SOURce <Ch> :AUXiliary:FREQuency:MULTiplier <numeric>
SOURce <Ch> :AUXiliary:FREQuency:MULTiplier?
Description
Sets or reads out the basic frequency range offset to derive the
frequency of the auxiliary RF source (4-port VNA only).
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the frequency offset from –1e12 to 1e12;
Unit
Hz
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1 GHz
Related Commands
SOUR:AUX:FREQ:DIV
SOUR:AUX:FREQ:MULT
Equivalent Softkeys
Stimulus > Auxiliary Source > Offset