Copper Mountain Technologies S2 Series - Disp:wind:trac:ann:mark:pos:X

S2VNA and S4VNA SCPI Programming Manual
174
DISP:WIND:TRAC:ANN:MARK:POS:X
DISPlay:WINDow <Ch> :TRACe <Tr> :ANNotation:MARKer:POSition:X <numeric>
DISPlay:WINDow <Ch> :TRACe <Tr> :ANNotation:MARKer:POSition:X?
Description
Sets or reads out the display position of the marker annotation on
the X–axis by a percentage of the display width.
(command/query)
Target
Trace <Tr> of channel <Ch>,
<Tr>={[1]|2|...16}
<Ch>={[1]|2|...16}
Parameter
<numeric> the display position of the marker value on the X–axis from
0 to 100
Unit
% (percent)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Markers > Properties > Data X Position