Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
97
CALC:FUNC:DOM:STOP
CALCulate <Ch> [:SELected]:FUNCtion:DOMain:STOP <stimulus>
CALCulate <Ch> [:SELected]:FUNCtion:DOMain:STOP?
Description
Sets the stop value of the analysis range of the CALC:FUNC:EXEC
command.
(command/query)
Target
All traces of channel <Ch> (if the coupling is set to ON by the
CALC:FUNC:DOM:COUP command), the active trace of channel <Ch> (if
otherwise),
<Ch>={[1]|2|...16}
Parameter
<stimulus> the stop value of analysis range
Unit
{ Hz |s |dBm }
Query Response
<numeric>
Preset Value
0
Related Commands
CALC:FUNC:DOM
Equivalent Softkeys
None
CALC:FUNC:EXEC
CALCulate <Ch> [:SELected]:FUNCtion:EXECute
Description
Executes the analysis specified by the CALC:FUNC:TYPE command.
The analysis result can be read out by the CALC:FUNC:DATA?
command.
(no query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Related Commands
CALC:FUNC:TYPE
CALC:FUNC:DATA?
Equivalent Softkeys
None

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English