Copper Mountain Technologies S2 Series - Sens:freq:cent

S2VNA and S4VNA SCPI Programming Manual
314
SENS:FREQ:CENT
SENSe <Ch> :FREQuency:CENTer <frequency>
SENSe <Ch> :FREQuency:CENTer?
Description
Sets or reads out the stimulus center value of the sweep range for
linear or logarithmic sweep type.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the stimulus center value within the frequency limits of
the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
the center frequency of the analyzer
Equivalent Softkeys
Stimulus > Center