Copper Mountain Technologies S2 Series - Sens:offs:port:mult

S2VNA and S4VNA SCPI Programming Manual
320
SENS:OFFS:PORT:MULT
SENSe <Ch> :OFFSet:PORT <Pt> [:FREQuency]:MULTiplier <numeric>
SENSe <Ch> :OFFSet:PORT <Pt> [:FREQuency]:MULTiplier?
Description
Sets or reads out the basic frequency range multiplier of port <Pt>
when the frequency offset feature is ON and offset type is "PORT".
(command/query)
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2} for S2VNA or {[1]|2|3|4} for S4VNA
Parameter
<numeric> multiplier from –1000 to 1000;
Unit
n/a
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1
Related Commands
SENS:OFFS:STAT
SENS:OFFS:TYPE
Equivalent Softkeys
Stimulus > Frequency Offset > Port n > Multiplier