Copper Mountain Technologies S2 Series - Syst:freq:ext:lop:pow

S2VNA and S4VNA SCPI Programming Manual
388
SYST:FREQ:EXT:LOP:POW
SYSTem:FREQuency:EXTender:LOPort:POWer <numeric>
SYSTem:FREQuency:EXTender:LOPort:POWer?
Description
Sets or reads out the LO Port Power when analyzer is configured to
work with a frequency extender.
(command/query)
Parameter
<numeric> the power value.
Unit
dBm (decibel relative to 1 milliwatt)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
System > Misc Setup > Frequency Extender > LO Port Power