Copper Mountain Technologies S2 Series - Sour:aux:pow

S2VNA and S4VNA SCPI Programming Manual
352
SOUR:AUX:POW
SOURce <Ch> :AUXiliary:POWer[:AMPLitude] <numeric>
SOURce <Ch> :AUXiliary:POWer[:AMPLitude]?
Description
Sets or reads out the power of the auxiliary RF source (4-port VNA
only).
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the power level of the auxiliary RF source within the
power limits of the analyzer;
Unit
dBm (decibels above 1 milliwatt)
Resolution
0.05 dBm
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0 dBm
Equivalent Softkeys
Stimulus > Auxiliary Source > Power