Copper Mountain Technologies S2 Series - Disp:col:grat; Disp:col:res

S2VNA and S4VNA SCPI Programming Manual
163
DISP:COL:GRAT
DISPlay:COLor:GRATicule <numeric 1> , <numeric 2> , <numeric 3>
DISPlay:COLor:GRATicule?
Description
Sets or reads out the grid and the graticule label color for trace
display.
(command/query)
Parameter
<numeric 1> Red value R from 0 to 255;
<numeric 2> Green value G from 0 to 255;
<numeric 3> Blue value B from 0 to 255.
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric 1>, <numeric 2>, <numeric 3>
Preset Value
160, 160, 164
Equivalent Softkeys
Display > Properties > Color > Grid > { Red | Green | Blue }
DISP:COL:RES
DISPlay:COLor:RESet
Description
Restores the display settings to the default values.
(no query)
Equivalent Softkeys
Display > Properties > Set Defaults