Copper Mountain Technologies S2 Series - Calc:par:coun

S2VNA and S4VNA SCPI Programming Manual
72
CALC:PAR:COUN
CALCulate <Ch> :PARameter:COUNt <numeric>
CALCulate <Ch> :PARameter:COUNt?
Description
Sets or reads out the number of traces in the channel.
(command/query)
Target
The channel <Ch>={[1]|2|...16}
Parameter
<numeric> The number of the traces in the channel from 1 to 16
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1
Equivalent Softkeys
Display > Num of Traces