Copper Mountain Technologies S2 Series - Trig:poin

S2VNA and S4VNA SCPI Programming Manual
404
TRIG:POIN
TRIGger[:SEQuence]:POINt {OFF|ON|0|1}
TRIGger[:SEQuence]:POINt?
Description
Turns ON/OFF the point trigger feature.
When the point trigger is turned ON, the external trigger response
is the single point. When the point trigger feature is turned OFF,
the external trigger response is the entire sweep.
(command/query)
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Related Commands
TRIG:SOUR
Equivalent Softkeys
Stimulus > Trigger > Ext Trig Event > { On Sweep | On Point }