Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit:lab; Sens:corr:coll:ckit:ord:load

S2VNA and S4VNA SCPI Programming Manual
222
SENS:CORR:COLL:CKIT:LAB
SENSe:CORRection:COLLect:CKIT:LABel <string>
SENSe:CORRection:COLLect:CKIT:LABel?
Description
Sets or reads out the calibration kit label.
(command/query)
Target
Selected calibration kit
Parameter
<string>, up to 254 characters
Query Response
<string>
Equivalent Softkeys
Calibration > Cal Kit > Cal Kit n > Label
SENS:CORR:COLL:CKIT:ORD:LOAD
SENSe:CORRection:COLLect:CKIT:ORDer:LOAD <port> , <numeric>
SENSe:CORRection:COLLect:CKIT:ORDer:LOAD? <port>
Description
Sets or reads out the number of the calibration standard of the
load type, used for the measurement of the specified port.
(command/query)
Target
Selected calibration kit
Parameter
<port> the number of the port from 1 to 2 (or 4)
<numeric> the number of the calibration standard
Out of Range
If the specified standard number is greater than the number of standards
in the kit, an error occurs. If the specified standard number is not the load
standard number, an error occurs.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Specify CLSs > Load Port x (Row)