Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit:stan:c2

S2VNA and S4VNA SCPI Programming Manual
232
SENS:CORR:COLL:CKIT:STAN:C2
SENSe:CORRection:COLLect:CKIT:STAN <Std> :C2 <numeric>
SENSe:CORRection:COLLect:CKIT:STAN <Std> :C2?
Description
Sets or reads out the C2 value for the open calibration standard.
(command/query)
Target
Standard <Std> of the selected calibration kit,
<Std>={[1]|2|...N}, where N – the number of the standards in
the calibration kit
Parameter
<numeric> the C2 value from –1E18 to 1E18
Unit
1E–36 F/Hz
2
(Farad/Hertz
2
)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Define STDs > C2 10
–36
F/Hz
2