Copper Mountain Technologies S2 Series - Sens:corr:coll:ecal:ori:stat; Sens:corr:coll:ecal:path

S2VNA and S4VNA SCPI Programming Manual
245
SENS:CORR:COLL:ECAL:ORI:STAT
SENSe:CORRection:COLLect:ECAL:ORIentation:STATe {OFF|ON|0|1}
SENSe:CORRection:COLLect:ECAL:ORIentation:STATe?
Description
Turns ON/OFF the Auto-Orientation function when the AutoCal
Module calibration is executed.
(command/query)
Target
AutoCal Module
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Calibration > AutoCal > Orientation > Auto-Orientation
SENS:CORR:COLL:ECAL:PATH
SENSe:CORRection:COLLect:ECAL:PATH <numeric1> , <numeric2>
SENSe:CORRection:COLLect:ECAL:PATH? <numeric1>
Description
Sets or reads out the AutoCal module port number which is
connected to a specified port of Network Analyzer.
(command/query)
Target
AutoCal
Parameter
<numeric1> Network Analyzer Port Number,
<numeric2> AutoCal Module Port Number:
1- Port A of AutoCal Module
2- Port B of AutoCal Module
Query Response
<numeric>
Equivalent Softkeys
Calibration > AutoCal > Orientation > Port 1 | Port 2