Copper Mountain Technologies S2 Series - Sens:swe:poin

S2VNA and S4VNA SCPI Programming Manual
339
SENS:SWE:POIN
SENSe <Ch> :SWEep:POINts <numeric>
SENSe <Ch> :SWEep:POINts?
Description
Sets or reads out the number of measurement points.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the number of measurement points from 2 to maximum limit
of the analyzer.
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
201
Equivalent Softkeys
Stimulus > Points