Copper Mountain Technologies S2 Series - Disp:col:trac:mem; Disp:enab

S2VNA and S4VNA SCPI Programming Manual
165
DISP:COL:TRAC:MEM
DISPlay:COLor:TRACe <Tr> :MEMory <numeric 1> , <numeric 2> , <numeric 3>
DISPlay:COLor:TRACe <Tr> :MEMory?
Description
Sets or reads out the memory trace color.
(command/query)
Target
Trace <Tr>,
<Tr>={[1]|2|...16}
Parameter
<numeric 1> Red value R from 0 to 255;
<numeric 2> Green value G from 0 to 255;
<numeric 3> Blue value B from 0 to 255.
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric 1>, <numeric 2>, <numeric 3>
Preset Value
Varies depending on the trace number.
Equivalent Softkeys
Display > Properties > Color > Memory Trace > { Red | Green | Blue }
DISP:ENAB
DISPlay:ENABle {OFF|ON|0|1}
DISPlay:ENABle?
Description
Turns ON/OFF the display update.
(command/query)
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
Display > Update