Copper Mountain Technologies S2 Series - Calc:lim

S2VNA and S4VNA SCPI Programming Manual
104
CALC:LIM
CALCulate <Ch> [:SELected]:LIMit[:STATe] {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:LIMit[:STATe]?
Description
Turns ON/OFF the limit test.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Limit Test > Limit Test