Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
322
SENS:OFFS:PORT:STAR
SENSe <Ch> :OFFSet:PORT <Pt> [:FREQuency]:STARt <frequency>
SENSe <Ch> :OFFSet:PORT <Pt> [:FREQuency]:STARt?
Description
Sets or reads out the frequency sweep start of port <Pt> when the
frequency offset feature is ON and offset type is "PORT".
(command/query)
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2} for S2VNA or {[1]|2|3|4} for S4VNA
Parameter
<frequency> frequency sweep start of port <Pt>;
Unit
Hz
Query Response
<numeric>
Related Commands
SENS:OFFS:STAT
SENS:OFFS:TYPE
Equivalent Softkeys
Stimulus > Frequency Offset > Port n > Start

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English