Copper Mountain Technologies S2 Series - Sens:freq:star

S2VNA and S4VNA SCPI Programming Manual
316
SENS:FREQ:STAR
SENSe <Ch> :FREQuency:STARt <frequency>
SENSe <Ch> :FREQuency:STARt?
Description
Sets or reads out the stimulus start value of the sweep range for
linear or logarithmic sweep type.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the stimulus start value within the frequency limits of the
analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The minimum frequency limit of the analyzer.
Equivalent Softkeys
Stimulus > Start