Copper Mountain Technologies S2 Series - Calc:fsim:bal:par:bal

S2VNA and S4VNA SCPI Programming Manual
53
CALC:FSIM:BAL:PAR:BAL
CALCulate <Ch> :FSIMulator:BALun:PARameter <Tr> :BALanced[:DEFine] <char>
CALCulate <Ch> :FSIMulator:BALun:PARameter <Tr> :BALanced[:DEFine]?
Description
Selects the measurement parameter of the fixture simulation
function when the device type is BALanced.
(command/query)
Target
Trace <Tr> of channel <Ch>,
<Tr>={[1]|2|...16}
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the measurement parameter:
SDD11
SCD11
SDC11
SCC11
Query Response
{SDD11|SCD11|SDC11|SCC11}
Preset Value
SDD11
Related Commands
CALC:FSIM:BAL:DEV
Equivalent Softkeys
Analysis > Fixture Simulator > Measurement > {Sdd11|Scd11|Sdc11|
Scc11 }