Copper Mountain Technologies S2 Series - Calc:mark:set

S2VNA and S4VNA SCPI Programming Manual
135
CALC:MARK:SET
CALCulate <Ch> [:SELected]:MARKer <Mk> :SET <char>
Description
Sets the value of the specified item to the value of the position of
the marker.
(no query)
Target
Marker <Mk> of the active trace of channel <Ch>,
<Ch>={[1]|2|...16}
<Mk>={[1]|2|...16}
Parameter
<char> Specifies the type of the marker search:
STARt : Sweep start value set to the stimulus value of the marker
position.
STOP : Sweep stop value set to the stimulus value of the marker
position.
CENTer : Sweep center value set to the stimulus value of the
marker position.
RLEVel : Reference value set to the response value of the marker
position.
DELay : Delay value set to the response value of the marker
position.
Equivalent Softkeys
Markers > Marker Functions > { Marker–>Start | Marker–>Stop |
Marker –>Center | Marker–>Ref Value | Marker–>Delay }