Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
351
SOUR:AUX:PORT
SOURce <Ch> :AUXiliary:PORT <numeric>
SOURce <Ch> :AUXiliary:PORT?
Description
Sets or reads out the port number assigned to the auxiliary RF
source when it is turned on (4-port VNA only).
The auxiliary port can not be used for measurements. Ports are
divided into two groups: 1, 2 and 3, 4 ports. The second port of the
group that comprises the auxiliary port can not be used as a
stimulus.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> port number assigned to the auxiliary RF source from 1
to 4;
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
4
Equivalent Softkeys
Stimulus > Auxiliary Source > Select Port

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English