Copper Mountain Technologies S2 Series - Calc:mark:coun

S2VNA and S4VNA SCPI Programming Manual
117
CALC:MARK:COUN
CALCulate <Ch> [:SELected]:MARKer:COUNt <numeric>
CALCulate <Ch> [:SELected]:MARKer:COUNt?
Description
Sets the number of the turned ON markers.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric>, range from 0 to 16
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Notes
Choosing 16 turns on the reference marker and sets the markers 1 to 15
to the relative values.
Equivalent Softkeys
None