Copper Mountain Technologies S2 Series - Disp:wind:X:spac

S2VNA and S4VNA SCPI Programming Manual
181
DISP:WIND:X:SPAC
DISPlay:WINDow <Ch> :X:SPACing <char>
DISPlay:WINDow <Ch> :X:SPACing?
Description
Sets or reads out the display method of the graph horizontal axis
for the segment sweep.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Choose from:
LINear : Frequency base (linear frequency axis)
OBASe : Order base (linear axis of the point numbers)
Out of Range
The command is ignored.
Query Response
{LIN|OBAS}
Preset Value
LIN
Related Commands
SENS:SWE:TYPE
Equivalent Softkeys
Stimulus > Segment Table > Segment Display