Copper Mountain Technologies S2 Series - Syst:comm:ecal:imp; Syst:comm:ecal:thru

S2VNA and S4VNA SCPI Programming Manual
383
SYST:COMM:ECAL:IMP
SYSTem:COMMunicate:ECAL:IMPedance <port> , <char>
SYSTem:COMMunicate:ECAL:IMPedance? <port>
Description
Sets or reads out the impedance state of the specified port of
AutoCal module.
(command/query)
Parameters
<port> : Port number of the AutoCal module
<char> Specifies the math operation:
OPEN : OPEN impedance state
SHORt : SHORT impedance state
LOAD : LOAD impedance state
LOAD2 : LOAD2 impedance state
OPEN2 : OPEN2 impedance state
Query Response
{OPEN|SHOR|LOAD|THRU|LOAD2|OPEN2 }
Preset Value
LOAD
Equivalent Softkeys
None
SYST:COMM:ECAL:THRU
SYSTem:COMMunicate:ECAL:THRU <port1> , <port2>
Description
Sets the THRU state between the specified 2 ports of AutoCal
module (command only).
Parameters
<port1> : the first port number of the AutoCal module
<port2> : the second port number of the AutoCal module
Equivalent Softkeys
None