Copper Mountain Technologies S2 Series - Sens:corr:coll:thru:add:perm

S2VNA and S4VNA SCPI Programming Manual
276
SENS:CORR:COLL:THRU:ADD:PERM
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:PERMittivity <numeric>
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:PERMittivity?
Description
Sets or reads out the value of the permittivity of the thru media in
the thru addition function.
This parameter is used to calculate the adapter delay when the
thru length is setting; therefore this parameter must be set before
setting of the thru length.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the value of the permittivity of the thru
Query Response
<numeric>
Preset Value
1.000649 (air)
Equivalent Softkeys
Calibration > Calibrate > Thru Addition > Permittivity