Copper Mountain Technologies S2 Series

To Next Page

To Previous Page

S2VNA and S4VNA SCPI Programming Manual

120

CALC:MARK:DISC

CALCulate

<Ch>

[:SELected]:MARKer:DISCrete {OFF|ON|0|1}

CALCulate

<Ch>

[:SELected]:MARKer:DISCrete?

Description

Turns ON/OFF the marker discrete mode.

(command/query)

Target

All traces of channel <Ch> (if the marker coupling is set to ON by the

CALC:MARK:COUP command), the active trace of channel <Ch> (if

otherwise),

<Ch>={[1]|2|...16}

Parameter

{ON|1} : ON

{OFF|0} : OFF

Query Response

{0|1}

Preset Value

Equivalent Softkeys

Marker > Properties > Discrete

Copper Mountain Technologies S2 Series - Calc:mark:disc