Copper Mountain Technologies S2 Series - Sens:offs:type

S2VNA and S4VNA SCPI Programming Manual
336
SENS:OFFS:TYPE
SENSe <Ch> :OFFSet:TYPE <char>
SENSe <Ch> :OFFSet:TYPE?
Description
Sets or reads out the frequency offset type when the frequency
offset feature is ON. There are two frequency offset types:
"Port1/Port2" and "Source/Receivers". First offset type offsets ports
against each other. Second offset type offsets source against
receivers.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the offset type:
PORT : Port1/Port2 offset
SRCRcv : Source/Receivers offset
Query Response
{PORT|SRCR}
Preset Value
PORT
Equivalent Softkeys
Stimulus > Frequency Offset > Offset Type