Copper Mountain Technologies S2 Series - Form:bord

S2VNA and S4VNA SCPI Programming Manual
183
FORM:BORD
FORMat:BORDer <char>
FORMat:BORDer?
Description
Sets or reads out the transfer order of each byte in data, when the
binary data transfer format is set by the FORM:DATA command.
(command/query)
Parameter
<char> Choose from:
NORMal : Normal (big-endian format)
SWAPped : Swapped (little-endian format)
Query Response
{NORM|SWAP}
Preset Value
NORM
Notes
The Intel x86 and also AMD64 / x86-64 series of processors use the
little-endian format.
Related Commands
FORM:DATA
Equivalent Softkeys
None