Copper Mountain Technologies S2 Series - Calc:tran:time:star

S2VNA and S4VNA SCPI Programming Manual
155
CALC:TRAN:TIME:STAR
CALCulate <Ch> [:SELected]:TRANsform:TIME:STARt <time>
CALCulate <Ch> [:SELected]:TRANsform:TIME:STARt?
Description
Sets or reads out the time domain start value, when the time
domain transformation function is turned ON.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<time> the time domain start value, the range varies depending on the
specified frequency range and the number of points
Unit
s (second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
–1e–8
Equivalent Softkeys
Analysis > Time Domain > Start